You should know some network related terms while installing a router for the first time. A router is one of the most common networking devices. Every router is provided with its default IP address, and it could be 192.168.1.1 or 192.168.0.1, etc. IP 192.168.1.1 is used by many routers, including Netgear, Linksys and TP-Link Router. For setting up a router, you need to log in to it, and for that, you will require a username and password.
You don’t need to remember the username or password if you haven’t logged in with a 192.168.1.1 IP Address for quite a while. 192.168.1.1 is IP address that seems quite common in most of the Netgear, Linksys and TP-Link routers. This article will tell you all which needs to be known about it.
What is 192.168.1.1 IP Address?
Every router has its default username and password, which is used to login into the router. Some IP addresses are not accessible through the public internet; 192.168.1.1 is one of them.
It is one of the 65 536 IP addresses which belongs to the 16-bit block of the private IPv4 address spectrum. Many Linksys, Asus, D-Link, Netgear, Huawei, and TP-Link routers use 192.168.1.1 default IP address. LANs use private IP addresses and therefore save the IPv4 addresses from exhaustion.
Since there is no need for approval from a regional Internet registry for using private IP addresses, anyone can use it, be it an organization or an individual. All it needs is to set up the devices connected through the internet using NAT (Network Address Translation) method. Home router manufacturers use private IP addresses as a default gateway, including 192.168.1.1.
What Is So Special About IP Address 192.168.1.1?
As you might have learned in school, every computer that uses Internet Protocol for communication is provided with an Internet Protocol address, commonly known as an IP address. An IP address provides a unique identity to all the devices on a network for making a path to access it.
If your router isn’t working after a 30-30-30 reset, then it could be broken. You can get a new one or can repair it. Before reaching the key, you might have to connect it to routers or modem with the help of an Ethernet wire.
How to Login to 192.168.1.1 Admin Login – Default Router Login
Step 1: First, connect your router and PC through an RJ45 cable.
Step 2: Open your browser and enter 192.168.1.1 in the URL bar.
Step 3: A small box will open, which will ask for a username and password. After logging in, go to “Wireless Settings” and then “Change Settings.”
WiFi is an ideal option for using the internet at an affordable speed. You will be linked to the web after a while. If you aren’t connected, then you should talk to your ISP.
192.168.1.1 IP Address Router Reset Settings
Step 1: Switch on the router and connect it to the computer with an Ethernet cable.
Step 2: Type http://192.168.1.1 in the address bar in a web browser.
Step 3: Type the exact username and password in the spaces.
Step 4: Click on the “Administration” tab, then open the “Factory Defaults” sub-tab.
Step 5: From the options given, hit the “Restore Factory Defaults” button.
How to Access NETGEAR Router Admin Page
It is effortless to log into the NETGEAR wireless router admin page. But first of all, you need to make sure that you are connected to the NETGEAR router’s network. If all the things are perfect just dive into the instructions given below:
Step 1: First, you have to sign in to access the admin panel. Open the default browser, which you usually use for surfing the internet.
Step 2: Enter “http://www.routerlogin.net“ or “http://www.routerlogin.com“ in the address bar. You can also enter the router’s default IP address 192.168.1.1.
Step 3: In the given window opened, type the username and password in the fields. The default username and password are “Admin” and “Password,” respectively (both are case sensitive).
Step 4: Now log in.
Now you are successfully logged into your NETGEAR router configuration panel. You can access the configuration panel for your router whenever you want, using your browser to make any changes to your router. All issues can be solved by it updating the firmware or solving the troubleshooting your router.
What Are Default Login Credentials for the Netgear Router Login Page?
The first thing for setting up the Netgear router is logging into the routerlogin.net page. It will only require the default username and password for login. You can find it in the router manual booklet easily.
How to Login to a TP-Link Router Using 192.168.1.1
If you want to login to your TP-link router and want to get into the router settings, it’s quite simple to do so. There are two easy steps to follow to access your TP-Link router’s admin panel.
Step 1: Open your web browser and enter http://192.168.1.1 in the address bar.
Step 2: A login page will open where you need to type the username and password. The TP-Link routers have a default username and password, which is “admin” in lowercase. Type the login credentials in it.
How to Factory Reset Your TP-Link Router
If you are unable to access the router using the default password, you can factory reset the router.
Step 1: Hold the reset button at the back of the router for 10 seconds while it is powered on. The lights will flash and go off and then again start blinking, which means we have perfectly reset the router.
Step 2: Now again, try to login with the default password as the router is back to the default state.
How to Login to Linksys Router Using 192.168.1.1 or 192.168.l.l
Linksys Routers have a default IP address and, therefore, could be efficiently logged in.
Step 1: Start, Open any browser on your PC and enter http://192.168.1.1. And Enter the username and password given below:
- Username: admin
- Password: pass/admin
Step 2: After that, you can access the Router admin page and can change the password from the “Settings.”
Also, Check :
192.168.2.1
Nvlddmkm.sys
DPC Watchdog Violation
Final Words:
This is also essential to make sure your system is safe from hacking. If you are using the router with default settings, then there is some chance of hacking your system. After reading this article, you would have gathered sufficient knowledge about a wireless router so that you could connect the router with your PC.
